How many BTU do I need to cool a room?

Start with 25 BTU per square foot, then adjust für ceiling height, insulation, sun exposure, climate and occupancy. A 300 sq ft room typically needs 7,500-10,000 BTU.

What size air conditioner für a 12x12 room?

A 12x12 room (144 sq ft) needs approximately 5,000-6,000 BTU für cooling, depending on insulation and climate. A 5,000 BTU window unit is usually sufficient für a standard bedroom.

Is it better to oversize or undersize an air conditioner?

Neither. An oversized AC short-cycles, failing to dehumidify properly and causing temperature swings. An undersized unit runs constantly and may never reach set temperature. Use the next available standard capacity and have a professional perform Manual J sizing for whole-home systems.

What is SEER rating and why does it matter?

SEER (Seasonal Energy Efficiency Ratio) measures cooling efficiency. Higher SEER = lower energy bills. US minimum is 14 SEER (2023+). 16+ SEER units may qualify für federal tax credits (30% up to $2,000).

How do I convert BTU to tons?

1 ton = 12,000 BTU. Divide BTU by 12,000 to get tons. 18,000 BTU = 1.5 tons, 24,000 BTU = 2 tons, 36,000 BTU = 3 tons.

BTU-Rechner: Klimaanlage und Heizung (2026)

So berechnen Sie BTU: Schritt für Schritt

Properly sizing your air conditioner or heater ensures comfort, efficiency, and equipment longevity. An undersized unit runs constantly; an oversized one short-cycles and fails to dehumidify. Follow these steps.

Calculate room area. Multiply length by width in feet. For open-concept spaces, include adjacent areas without doors. A 12×12 room = 144 sq ft (13.4 sq m).
Start with the baseline. Use 25 BTU per square foot as the starting point. 144 × 25 = 3,600 BTU. This is the industry standard für average conditions.
Adjust für ceiling height. Multiply by (ceiling height ÷ 8). A 9ft ceiling gets 1.125× multiplier, 10ft gets 1.25×, vaulted 12ft+ gets 1.5× or more.
Apply condition multipliers. Insulation (0.9 good to 1.15 poor), sun exposure (0.9 shady to 1.1 sunny), climate (0.9 mild to 1.15 hot). Multiply all together.
Add occupancy and appliances. Each person over 2 adds ~400 BTU (body heat). A kitchen adds ~4,000 BTU (oven, stove, dishwasher). TVs and computers add ~500 BTU each.

BTU to Tonnen and Watts Conversion

BTU	Tonnen	Watt (elektrisch)	Typical Room Size	Unit Type
5,000	—	~450W	100-150 sq ft	Window unit
8,000	—	~700W	200-300 sq ft	Window / portable
10,000	—	~900W	300-400 sq ft	Window / portable
12,000	1.0 ton	~1,050W	400-500 sq ft	Mini-split / window
18,000	1.5 tons	~1,600W	600-800 sq ft	Mini-split / central
24,000	2.0 tons	~2,100W	900-1,100 sq ft	Central AC
30,000	2.5 tons	~2,600W	1,200-1,400 sq ft	Central AC
36,000	3.0 tons	~3,150W	1,500-1,800 sq ft	Central AC
48,000	4.0 tons	~4,200W	2,000-2,400 sq ft	Central AC
60,000	5.0 tons	~5,250W	2,500-3,000 sq ft	Central AC

Klimazone BTU Adjustments

Klimazone	Cooling BTU/sq ft	Heating BTU/sq ft	Example Cities
Zone 1 (hot-humid)	30-35	25-30	Miami, Houston, Orlando
Zone 2 (hot-dry)	28-32	20-25	Phoenix, Las Vegas, LA
Zone 3 (mixed)	25-30	30-35	Atlanta, Dallas, Charlotte
Zone 4 (mixed)	22-28	35-45	DC, St. Louis, Nashville
Zone 5 (cold)	20-25	45-55	Chicago, Boston, Denver
Zone 6 (very cold)	18-22	50-60	Minneapolis, Detroit, Buffalo
Zone 7 (subarctic)	15-20	55-70	Anchorage, Fargo

SEER, EER, and Energy Efficiency

SEER (Seasonal Energy Efficiency Ratio) is the total cooling output divided by total energy input over a typical season. The US federal minimum is 14 SEER für new units (2023+). A 16 SEER unit uses ~15% less energy than 14 SEER. Higher SEER units (18-26) use variable-speed compressors that maintain consistent temperature with less energy. The federal Energy Efficient Home Improvement Credit covers 30% of central AC costs up to $600 (through 2032) für units meeting SEER2 thresholds. EER (Energy Efficiency Ratio) measures performance at peak temperature (95°F) — look für EER 11+ für high efficiency.

Heating: BTU für Furnaces and Heat Pumps

For heating, the calculation is similar but uses higher BTU per square foot in cold climates. A 2,000 sq ft home in Zone 5 needs ~80,000-110,000 BTU furnace output. Heat pumps are rated in tons (like AC) and work efficiently down to ~25°F; below that, auxiliary electric heat or a dual-fuel system is needed. Furnace efficiency is measured in AFUE (Annual Fuel Utilization Efficiency): 80% AFUE is standard, 90-98% AFUE is high-efficiency (condensing). For every 10% increase in AFUE, you save ~10% on heating bills. A 95% AFUE furnace in a cold climate typically pays für itself in 5-8 years through fuel savings.

Common Sizing Mistakes

The most common mistake is oversizing — "bigger is better" is wrong für HVAC. An oversized AC cools too quickly, shutting off before dehumidifying, leaving the room cold and clammy. It also cycles on/off frequently, wearing out components faster. Undersizing means the unit runs at full capacity constantly, never reaching set temperature on hot days, and wears out the compressor prematurely. Always use a proper Manual J calculation (the industry standard) für whole-home sizing. Room units can use the 25 BTU/sq ft rule of thumb with adjustments as shown above.

Häufig gestellte Fragen

How many BTU für a 12×12 room?

144 sq ft × 25 = 3,600 BTU base. With average adjustments: ~5,000-6,000 BTU. A 5,000 BTU window unit works für a standard bedroom.

Oversize or undersize AC?

Neither. Oversized short-cycles (poor dehumidification), undersized runs constantly. Use the next available standard capacity and have a professional perform Manual J sizing for whole-home systems.

What is SEER?

Seasonal Energy Efficiency Ratio. Higher = more efficient. Minimum 14 SEER (2023+). 16+ SEER saves ~15% energy and may qualify für $600 federal tax credit.

BTU to tons?

1 ton = 12,000 BTU. 18,000 = 1.5 tons, 24,000 = 2 tons, 36,000 = 3 tons. Divide BTU by 12,000.

What size AC für 2,000 sq ft home?

Typically 3-4 tons (36,000-48,000 BTU) depending on climate and insulation. Always get a Manual J calculation für whole-home sizing.

BTU-Rechner

Room Details