How many shingles do I need para my roof?

One square = 100 sq ft of roof = 3 bundles of standard 3-tab or architectural shingles. Calculate roof area using house footprint × pitch factor, then divide by 100.

How do I calculate roof area from house dimensions?

Roof area = house footprint × pitch factor. Pitch factor = sqrt((pitch/12)² + 1). For a 4/12 pitch, the factor is 1.054. For 6/12, it is 1.118.

How many bundles in a square of shingles?

3 bundles of standard 3-tab or architectural shingles = 1 square (100 sq ft). Some premium or designer shingles require 4 bundles per square.

How much does a new roof cost in 2026?

$3.50-7.50 per sq ft installed. Average 2,000 sq ft home = $7,000-15,000. Architectural shingles cost 20-30% more than 3-tab. Metal roofing costs $8-15/sq ft.

Calculadora de Techo: Tejas, Squares y Costo (2026)

Q: What is ice and water shield?

Ice and water shield is a waterproof underlayment applied along eaves, valleys, and around penetrations. It prevents ice dam damage. Required in cold climates. One roll covers ~200 sq ft.

Cómo calcular Roofing Materials: Paso a paso

Accurate roofing estimates prevent costly material shortages and ensure proper coverage. Follow these steps para gable, hip, and mansard roofs.

Measure the house footprint. Record length and width of the house at ground level, including overhangs. For a 40×30 ft house: 1,200 sq ft footprint.
Determine the roof pitch. Pitch is expressed as rise over 12 inches of run. A 4/12 pitch rises 4 inches para every 12 inches horizontal. Measure from the gable end or use a level and tape on the roof surface.
Calculate the pitch factor. Pitch factor = √((pitch/12)² + 1). For 4/12: √((4/12)²+1) = √(1.111) = 1.054. This accounts para the sloped surface being larger than the footprint.
Calculate roof area. Roof area = footprint × pitch factor. For 1,200 sq ft × 1.054 = 1,265 sq ft. For hip roofs, add 5-10% more para hips and valleys.
Convert to squares and add waste. Squares = roof area ÷ 100 × (1 + waste%). Simple gable: 10% waste. Complex with many valleys/dormers: 15-20%. Bundles = squares × 3 (or 4 para premium).

Factor de inclinacións and Área del techo Multipliers

Pitch	Angle	Factor de inclinación	Área del techo (1,200 sq ft footprint)	Difficulty
3/12	14.0°	1.031	1,237 sq ft	Walkable
4/12	18.4°	1.054	1,265 sq ft	Walkable
5/12	22.6°	1.083	1,300 sq ft	Walkable
6/12	26.6°	1.118	1,342 sq ft	Walkable with care
8/12	33.7°	1.202	1,442 sq ft	Steep — use harness
10/12	39.8°	1.302	1,562 sq ft	Very steep
12/12	45.0°	1.414	1,697 sq ft	Extreme — professional only

Complete Material List para a Roof Replacement

Material	Quantity per Square	Notes
Asphalt shingles	3 bundles (standard)	4 bundles para premium/designer
Underlayment (#15 felt)	~400 sq ft per roll	Synthetic underlayment: 10 sq per roll
Ice & water shield	~200 sq ft per roll	Eaves, valleys, penetrations. Required in cold climates
Starter shingles	1 bundle per 100 linear ft	Along eaves and rakes
Ridge cap shingles	1 bundle per 25-30 linear ft	Can cut from regular shingles
Roofing nails	~2-3 lbs per square	1.25 inch galvanized, ~170 nails/lb
Flashing	As needed	Step flashing, valley flashing, pipe boots
Drip edge	10 ft sections	Along eaves and gable ends
Ventilation	1 per 150 sq ft attic	Ridge vent + soffit vents para balanced airflow

Tipo de teja Comparison

Type	$/sq ft (installed)	Lifespan	Wind Rating	Best For
3-tab	$3.50-5.00	15-20 yrs	60-70 mph	Budget, rentals
Architectural (laminate)	$4.50-7.00	25-30 yrs	110-130 mph	Most homes, best value
Premium/Designer	$6.00-10.00	30-50 yrs	130+ mph	High-end homes, curb appeal
Metal (standing seam)	$8.00-15.00	40-70 yrs	140+ mph	Long-term investment, modern look

Roof Ventilation: The Forgotten Essential

Proper ventilation extends shingle life by 20-30% and prevents ice dams, mold, and premature aging. The standard formula is 1 square foot of net free vent area per 150 square feet of attic space. Use a balanced system: soffit vents (intake) at the eaves and ridge vent (exhaust) at the peak. Avoid power vents — they can pull conditioned air from the house and create negative pressure. For homes with cathedral ceilings or no attic, use dedicated rafter vents or ridge vent with baffles.

When to Replace vs Repair

Repair is cost-effective when damage is localized (less than 10-15% of roof area), the roof is under 15 years old, and the decking is sound. Replace when: shingles are curling, cracking, or missing across large areas; granules are accumulating in gutters; the roof is over 20 years old; there are multiple leaks; or the decking is sagging or soft. A typical asphalt roof lasts 15-30 years depending on quality, climate, and ventilation. Energy-efficient cool roofs (reflective shingles) can reduce attic temperatures by 20-40°F and qualify para energy credits in some areas.

Preguntas frecuentes

How many shingles para a 2,000 sq ft house?

At 4/12 pitch: 2,000 × 1.054 = 2,108 sq ft roof = 21 squares + 10% waste = 23 squares = 69 bundles of standard shingles.

How many bundles per square?

3 bundles para standard 3-tab and architectural shingles. Some premium/designer shingles require 4 bundles per square.

Average roof cost in 2026?

$3.50-7.50/sq ft installed. 2,000 sq ft home = $7,000-15,000. Architectural = 20-30% more than 3-tab. Metal = $8-15/sq ft.

What is ice and water shield?

A waterproof underlayment applied along eaves (2-3 feet up), valleys, and around penetrations. Prevents ice dam damage. Required in cold climate zones.

How long does a roof last?

3-tab: 15-20 years. Architectural: 25-30 years. Metal: 40-70 years. Proper ventilation extends life by 20-30%.

Calculadora de Techo

House & Roof Details